In Europe, this has been all rolled up into one set of standards, called the CE (European Conformity, in French its backwards) mark. So the CE mark is the equivalent of the UL safety testing, and FCC testing (per a EMC Directive which is part of the CE standards).
There are generally two types of testing that must be done on new electronic products, safety and emissions testing. Also, if you have a medical product, other criteria must be followed. The FCC (Federal Communications Commission) requires certain emissions tests for electronic devices. Due to the recent ruling, testing does not actually have to be performed; it is up to the manufacturer to certify that the device complies with the requirements.
As with the FCC marking in the United States, companies can self-certify compliance with applicable CE standards; however, to do so they must provide lengthy technical documentation to support certification, and in many cases it is best to have a third-party laboratory Test their equipment and write reports.
CE Marking certification process :
Review of product, its application and its construction.
Evaluation of applicable directives and harmonic standards.
Mapping of product against applicable CE marking directives and harmonic standards
Getting product tested for directive / standard requirements.
Taking necessary action in construction of product to comply with directive / standard requirements.
TCF compilation.
CE Marking Procedure
The manufacturer identifies the product in Maharashtra, Mumbai, Pune or group of products in Maharashtra, Mumbai, Pune for which he wants to apply for CE marking. The manufacturer in Maharashtra, Mumbai, Pune then contacts a certification body. The certification body appoints an inspection body in Maharashtra, Mumbai, Pune and one or more notified laboratories in Maharashtra, Mumbai, Pune . This can either be separate bodies or it can be from the same organization as the certification body. If the manufacturer in Maharashtra, Mumbai, Pune has a specific wish concerning which inspection body and/or testing laboratories he wants to involve, he will have to make an agreement with the certification body to appoint the other bodies in Maharashtra, Mumbai, Pune.
CE Certificate of conformity
The assessment report from the initial inspection in Maharashtra, Mumbai, Pune, test reports (and a classification report for reaction to fire) from the notified laboratories and test reports from the manufacturer in Maharashtra, Mumbai, Pune (covering all declared characteristics from Table ZA.1 of the product standard) shall be sent to the certification body. The certification body in Maharashtra, Mumbai, Pune shall confirm that tests were conducted according to the criteria given in the product standard, including evaluation of test results, that the samples tested come from the product in Maharashtra, Mumbai, Pune for which a certificate of conformity in Maharashtra, Mumbai, Pune is applied for and that the FPC fulfils the criteria given in the product standard.
Eurotech providing CE Marking – Europeon product certification consultancy services in Aurangabad, Bandra(Mumbai Suburban district),Nagpur, Pune, Akola, Chandrapur, Jalgaon,Parbhani, Sholapur, Thane, Latur, Mumbai-City, Buldhana, Dhule, Kolhpur, Nanded, Raigad, Amravati, Nashik, Wardha, Ahmednagar, Beed, Bhandara, Gadchiroli, Jalna, Osmanabad, Ratnagiri, Sangli, Satara, Sindudurg, Yavatmal, Nandurbar, Washim, Gondia, Hingoli sanand and in other cities of Maharashtra, Mumbai, Pune and in India.
- JCT は 2003 年に開始され、1990 年に設立されました。15 年以上の経験から、認証とテストに取り組んできました。
- 500 を超えるお客様が JCT のサービスを選択し、JCT はお客様のために 1000 以上の証明書を取得し、多くの時間とお金を節約します。また、お客様がより多くの注文を得るのにも役立ちました。
- 世界中のお客様に 25 以上の認証を提供しています。TUV、SGS、BV、INTERTEK、CQC、CCIC、APPLUS などと連携しています。
- ご満足いただける仕上がりになると自負しております。何らかの理由で結果に完全に満足していない場合は、問題を修正し、笑顔になるまで仕事が完了したとは見なしません!
- 最後に隠された料金について心配する必要はありません。作業が始まる前に固定料金を提示するので、何が期待できるかを正確に知ることができます。私たちが引用するものは、あなたがそれ以上支払うことを期待できないものです.